Tharo PA500w Printer / Applicator New from the creators of EASYLABEL®, comes the Tharo PA500w Printer / Applicator... The ideal Print & Apply System for accurate, moderate to high speed labeling to the top or side of a product. Exceptionally Fast - The Tharo PA500w Printer/Applicator can apply over 100 labels per minute. Label size and application dependent. Accurate - Placement accuracy is assured by the printer’s stepper motor control. The PA500w is delivered with a product sensor and controller to control the triggering of the applicator for positioning a label on a product. Accuracy is label size and application dependent.

Economical - With minimal training, quick integration and increased productivity, the PA500w is an inexpensive solution for your demanding labeling requirements. Since the system is all electric, there is no need for compressed air, which makes the PA500w an excellent money saver!

Rugged - The PA500w was built to last with time-tested components. With rugged dependability, the PA500w provides accurate and worry-free operation with maximum up time and low maintenance.

State-of-the Art Printing Performance - The Apollo thermal/thermal transfer label printers print with 203 or 300 dpi resolution while incorporating advanced label handling capabilities.

Easy to Service - With few moving parts, the PA500w is easy to service and our reliable, after-sales customer service provides you with excellent technical support.

Built-in Efficiency and Versatility - The wipe-on brush assures proper application to smooth, flat surfaces as well as uneven surfaces. You can apply labels from 3” x 1” to 4 1/2” x 7” to a variety of items, including cartons, tray and blister packages, bags and cans.

Easy to Use - The compact PA500w is simple to operate. You can quickly setup and changeover the PA500w for top apply or side apply. The PA500w also integrates easily into existing production lines and packaging systems.
 

PA1000t Printer/Applicator New from the creators of EASYLABEL®, comes the Tharo PA1000t Printer/Applicator... powerful accessories for the Apollo Series of thermal / thermal transfer bar code label printers. Easy to Use - The Tharo PA1000t Printer/Applicator is easy to use, with minimal adjustments necessary, quick setup and changeover for applying labels to either the top or side of a product. Cost-effective - With minimal training, quick integration and increased personal productivity, the PA1000t Printer/ Applicator provides a rapid return on investment. Meet demanding applications with maximum up time and economical, worry-free operation!

Rugged - The PA1000t Printer/Applicator features all metal construction and is made to last with time-tested components. Heavy duty guide rods were engineered to compensate for high stress in side labeling with minimal deflection. With rugged dependability, the PA1000t provides accurate, true on-demand operation, with low maintenance and precise positioning.

Controlled Contact - via the use of springs and an adjustable pressure sensing switch on the Tamp Pad.

Easy to Service - With few moving parts, the PA1000t Printer/Applicator is easy to service, and replacing printers is a snap! And our reliable, after-sales customer service provides you with the best technical support in the industry! With a sleek design, and clean operation, the Tharo PA1000t is delivered with a customizable Tamp Pad that you can modify in-house to fit your specific label size. The Tamp Pad size can vary, allowing you the flexibility to accommodate labels from 2" x 1" to 4 1/2" x 8". Labeling products of variable height is a standard feature which adds a great deal of flexibility to the Tharo PA1000t. The PA1000t is delivered with a T-base stand and one Tamp Pad.

The compact PA1000t Printer/Applicator is quick and accurate, applying up to 60 labels per minute, depending on label size, printer used and height of product. The PLC interface provides maximum flexibility by allowing control of the system to be accomplished by almost any device, from a simple micro switch or optical sensor to a sophisticated intelligent controller (PLC). LEDs provide visual operating status and error conditions.

Tamp/Blow Alternative
For those special jobs where a Tamp Applicator isn't appropriate, the Tharo PA1000t/b Tamp Blow will do the trick! With the ability With the ability to apply labels to convex, concave or flat surfaces, on either the top or side of a product, the Tamp Pad size can vary allowing labels from 1 “x 3" to 4" x 6 1/2" to be used. The adjustable guide rods stop the Tamp Pad between 1/2" to 2” from the product - from there the label is blown on.

State-Of-The Art Label Printing Performance
The APOLLO thermal/thermal transfer label printers feature 203 or 300 dpi print resolution while incorporating advanced label handling capabilities. These handling features provide you with extremely tight print registration, label after label. The APOLLO Printers support all the popular bar codes, and give you workhorse-like production too...recent units back for maintenance exceeded 33 million inches of output!
 

Tharo PA1000tz Printer / Applicator New from the creators of EASYLABEL®, comes the Tharo PA1000tZ Printer/Applicator... a powerful accessory for the Zebra® Z4M™ thermal/thermal transfer bar code label printer. Easy to Use - The Tharo PA1000tZ Printer / Applicator is easy to use, with minimal adjustments necessary, quick setup and changeover for applying labels to either the top or side of a product.. Cost-effective - With minimal training, quick integration and increased personal productivity, the PA1000tZ Printer / Applicator provides a rapid return on investment. Meet demanding applications with maximum up time and economical, worry-free operation!

Rugged - The PA1000tZ Printer / Applicator features all metal construction and is made to last with time-tested components. Heavy-duty guide rods were engineered to compensate for high stress in side labeling with minimal deflection. With rugged dependability, the PA1000tZ provides accurate, true on-demand operation, with low maintenance and precise positioning.

Controlled Contact - via the use of springs and an adjustable pressure-sensing switch on the Tamp Pad.

Easy to Service - With few moving parts, the PA1000tZ Printer / Applicator is easy to service, and replacing printers is a snap! And our reliable, after-sales customer service provides you with the best technical support in the industry! With a sleek design, and clean operation, the Tharo PA1000tZ is delivered with a customizable Tamp Pad that you can modify in-house to fit your specific label size. The Tamp Pad size can vary, allowing you the flexibility to accommodate labels from 2" x 1" to 4 1/2" x 8". Labeling products of variable height is a standard feature, which adds a great deal of flexibility to the Tharo PA1000tZ. The PA1000tZ is delivered with a Hand Cranked Height Adjustable T-Base Stand and one Tamp Pad.

The compact PA1000tZ Printer / Applicator is quick and accurate, applying up to 58 labels per minute, depending on label size and height of product. The PLC interface provides maximum flexibility by allowing control of the system to be accomplished by almost any device, from a simple micro switch or optical sensor to a sophisticated intelligent controller (PLC). LEDs provide visual operating status and error conditions.

Tamp/Blow Alternative - For those special jobs where a Tamp Applicator isn’t appropriate, the Tharo PA1000t/bZ Tamp Blow will do the trick! With the ability to apply labels to convex, concave or flat surfaces, on either the top or side of a product, the Tamp Pad size can vary allowing labels from 1” x 3” to 4” x 6 1/2” to be used. The adjustable guide rods stop the Tamp Pad between 1/2” to 2” from the product - from there the label is blown on.
 

APOLLO 1 Printer / Applicator New from the creators of EASYLABEL®... The APOLLO 1 Printer-Applicator is designed to be the world's most accurate label applicator! Created for small, delicate, high-precision print and apply applications, the APOLLO is ideal for electronic components, printed circuit boards, pharmaceutical and medical applications, cosmetics, automotive parts, plastic parts, assemblies and much more!

SMALL LABELS, HIGH ACCURACY
With a sleek design, and clean, quiet operation, the APOLLO 1 Applicator provides you with a comprehensive, yet inexpensive solution for high precision, high accuracy print and apply requirements. The APOLLO 1 Applicator is a pneumatic tamp applicator that offers the flexibility of manual or automatic operation. The Applicator can be activated by foot switch, photo-sensor, proximity sensor, or can be interfaced with a PLC.

The unit attaches to the APOLLO 1 Printer to create a compact unit, with a small overall footprint, which allows for a variety of integration options for most manufacturing environments. The Applicator can apply a wide range of label sizes from 0.2" to 3.1" high, and 0.50" to 4.5" wide. The smallest label end-users are currently applying is .5" wide x .2" high.

NEARLY 4 TIMES MORE ACCURATE!
While most applicators apply labels with an accuracy of +/- 1/32", some APOLLO field installations currently are applying labels with an accuracy of +/- 1/125"... nearly four times more accurate. Why? While most applicators use one guide rod, the APOLLO uses three, a combination that offers far more precision. Also, while most printers present the label to the applicator, the APOLLO 1 Applicator does the opposite by moving back to the printer to get it. By retrieving the label directly from the printer peel edge in this fashion, further consistency is achieved by utilizing the more precise movements of the applicator. Accuracy is affected by the combination of label stock and ribbon, and by environmental conditions. The APOLLO Applicator is actually capable of precision greater than the ability of many label converters to produce a consistent spacing from label to label, due to the web tension variances of some types of presses.

STATE-OF-THE-ART LABEL PRINTING PERFORMANCE
The new APOLLO 1 thermal/thermal transfer label printer features 300 dpi print resolution and incorporates advanced label handling capabilities. These handling features provide you with extremely tight registration, insuring your format is placed consistently at the same position, label after label. This gives the APOLLO 1 the ability to handle a wide range of label materials including paper, polyester and high-temperature polyester. The APOLLO 1 Printer gives you workhorse-like production too. Recent units back for maintenance exceeded 33 million inches of output!

The APOLLO 1 features a high-speed 32-bit processor with 2 MB of RAM... ideal for downloading TrueType fonts or graphics, creating dramatic labels with impeccable print quality on bar codes, graphics and text. While most label printers offer 1 resident scalable font or none at all, the APOLLO 1 features 3 printer-resident scalable typefaces. I-Mark sensing, and a back-lit LCD display for higher readability in dimly lit areas, internal rewind and ribbon saver are also standard.

APOLLO 1 supports all the popular bar codes, including UPC/EAN, Code 39, Code 128 and Interleaved 2 of 5, as well as two-dimensional symbologies like PDF417 and DataMatrix with ECC200 .

OPTIONAL STAND-ALONE CAPABILITY
The APOLLO 1 also features the ability to work with or without a computer attached, giving you much more flexibility in meeting your labeling requirements. This stand-alone feature is ideal for saving work space, environments harsh to computers and eliminates "computer" operator training. APOLLO 1 is also great for printing labels in remote locations, thus eliminating the need for additional computers.

Tharo ALL-AROUND Printer / Applicator For precise application of labels to difficult cylindrical objects like test tubes. Type: Semi-Automatic Label Size Range: From 0.50"x 0.20" to 4.5"x 3.1" The ALL-AROUND Printer-Applicator is an extremely compact printer-applicator for applying labels to tubular objects such as test tubes, syringes, small bottles, or tubing. The ALL-AROUND was created for small, delicate, high-precision print and apply applications.

SMALL LABELS, HIGH ACCURACY
With a sleek design and clean, quiet operation, the ALL-AROUND Applicator provides you with a comprehensive, yet inexpensive solution for high precision, high accuracy print and apply requirements. The ALL-AROUND Applicator is a pneumatic tamp applicator with a set of rollers that will spin the object as soon as the tamp head makes contact. This action smoothes the label around the circumference of a cylindrical object.

The Applicator can be activated by a foot switch, photo-sensor, proximity sensor, or can be interfaced with a PLC. The unit attaches to the APOLLO 1 Printer to create a compact unit, with a small overall footprint, which allows for a variety of integration options for most manufacturing environments. The Applicator can apply a wide range of label sizes from 0.2" to 3.1" high, and 0.50" to 4.5" wide.

STATE-OF-THE-ART LABEL PRINTING PERFORMANCE
The new APOLLO 1 thermal/thermal transfer label printer features 300 dpi print resolution and incorporates advanced label handling capabilities. These handling features provide you with extremely tight registration, insuring your format is placed consistently at the same position, label after label. This gives the APOLLO 1 the ability to handle a wide range of label materials including paper, polyester and high-temperature polyester. The APOLLO 1 Printer gives you workhorse-like production too. Recent units back for maintenance exceeded 33 million inches of output!

The APOLLO 1 features a high-speed 32-bit processor with 2 MB of RAM (much more standard RAM than any other label printer)and is ideal for downloading TrueType fonts or graphics, creating dramatic labels with impeccable print quality on bar codes, graphics and text. While most label printers offer 1 resident scalable font or none at all, the APOLLO 1 features 3 printer-resident scalable typefaces. I-Mark sensing, and a back-lit LCD display for higher readability in dimly lit areas, internal rewind and a ribbon saver are also standard features.

APOLLO 1 supports all the popular bar codes, including UPC/EAN, Code 39, Code 128 and Interleaved 2 of 5, as well as two-dimensional symbologies like PDF417 and DataMatrix with ECC200 .

OPTIONAL STAND-ALONE CAPABILITY
The APOLLO 1 also features the ability to work with or without a computer attached, giving you much more flexibility in meeting your labeling requirements. This stand-alone feature is ideal for saving work space, environments harsh to computers and eliminates "computer" operator training. APOLLO 1 is also great for printing labels in remote locations, thus eliminating the need for additional computers.

Tharo SWING TAMP Printer / Applicator For applying labels to the side of products. Engineered so you don't have to re-orient the printer for side applications. Type: Semi-Automatic Label Size Range: From 0.50"x 0.20" to 4.5"x 3.1"   The SWING TAMP Printer-Applicator is an extremely compact printer-applicator for side apply of small labels. Created for small, delicate, high-precision print and apply applications, the SWING TAMP is ideal for electronic components, printed circuit boards, pharmaceutical and medical applications, cosmetics, automotive parts, plastic parts, assemblies and much more

SMALL LABELS, HIGH ACCURACY
With a sleek design, and clean, quiet operation, the SWING TAMP Applicator provides you with a comprehensive, yet inexpensive solution for high precision, high accuracy print and apply requirements. The SWING TAMP Applicator unit is a consists of a pneumatic cylinder that rotates 90° and a tamp pad with a maximum stroke length of 15mm. The SWING TAMP Applicator offers the flexibility of manual or automatic operation. The Applicator can be activated by foot switch, photo-sensor, proximity sensor, or can be interfaced with a PLC.

The unit attaches to the APOLLO 1 Printer to create a compact unit, with a small overall footprint, which allows for a variety of integration options for most manufacturing environments. The Applicator can apply a wide range of label sizes from 0.2" to 3.1" high, and 0.50" to 4.5" wide.

STATE-OF-THE-ART LABEL PRINTING PERFORMANCE
The new APOLLO 1 thermal/thermal transfer label printer features 300 dpi print resolution and incorporates advanced label handling capabilities. These handling features provide you with extremely tight registration, insuring that your format is placed consistently in the same position, label after label. This gives the APOLLO 1 the ability to handle a wide range of label materials including paper, polyester and high-temperature polyester. The APOLLO 1 Printer gives you workhorse-like production too. Recent units back for maintenance exceeded 33 million inches of output! The APOLLO 1 features a high-speed 32-bit processor with 2 MB of RAM (much more standard RAM than any other label printer) ideal for downloading TrueType fonts or graphics, creating dramatic labels with impeccable print quality on bar codes, graphics and text. While most label printers offer 1 resident scalable font or none at all, the APOLLO 1 features 3 printer-resident scalable typefaces. I-Mark sensing, and a back-lit LCD display for higher readability in dimly lit areas, internal rewind and a ribbon saver are also standard features. The APOLLO 1 supports all the popular bar codes, including UPC/EAN, Code 39, Code 128 and Interleaved 2 of 5, as well as two-dimensional symbologies like PDF417 and DataMatrix with ECC200 .

OPTIONAL STAND-ALONE CAPABILITY
The APOLLO 1 also features the ability to work with or without a computer attached, giving you much more flexibility in meeting your labeling requirements. This stand-alone feature is ideal for saving work space, environments harsh to computers and eliminates "computer" operator training. The APOLLO 1 is also great for printing labels in remote locations, thus eliminating the need for additional computers.